This module performs conversions between Python values and C structs represented
as Python strings. This can be used in handling binary data stored in files or
from network connections, among other sources. It uses
Format Strings as compact descriptions of the layout of the C
structs and the intended conversion to/from Python values.
Note
By default, the result of packing a given C struct includes pad bytes in
order to maintain proper alignment for the C types involved; similarly,
alignment is taken into account when unpacking. This behavior is chosen so
that the bytes of a packed struct correspond exactly to the layout in memory
of the corresponding C struct. To handle platform-independent data formats
or omit implicit pad bytes, use standard size and alignment instead of
native size and alignment: see Byte Order, Size, and Alignment for details.
7.3.2. Format Strings
Format strings are the mechanism used to specify the expected layout when
packing and unpacking data. They are built up from Format Characters,
which specify the type of data being packed/unpacked. In addition, there are
special characters for controlling the Byte Order, Size, and Alignment.
7.3.2.1. Byte Order, Size, and Alignment
By default, C types are represented in the machine’s native format and byte
order, and properly aligned by skipping pad bytes if necessary (according to the
rules used by the C compiler).
Alternatively, the first character of the format string can be used to indicate
the byte order, size and alignment of the packed data, according to the
following table:
| Character |
Byte order |
Size |
Alignment |
@ |
native |
native |
native |
= |
native |
standard |
none |
< |
little-endian |
standard |
none |
> |
big-endian |
standard |
none |
! |
network (= big-endian) |
standard |
none |
If the first character is not one of these, '@' is assumed.
Native byte order is big-endian or little-endian, depending on the host
system. For example, Intel x86 and AMD64 (x86-64) are little-endian;
Motorola 68000 and PowerPC G5 are big-endian; ARM and Intel Itanium feature
switchable endianness (bi-endian). Use sys.byteorder to check the
endianness of your system.
Native size and alignment are determined using the C compiler’s
sizeof expression. This is always combined with native byte order.
Standard size depends only on the format character; see the table in
the Format Characters section.
Note the difference between '@' and '=': both use native byte order, but
the size and alignment of the latter is standardized.
The form '!' is available for those poor souls who claim they can’t remember
whether network byte order is big-endian or little-endian.
There is no way to indicate non-native byte order (force byte-swapping); use the
appropriate choice of '<' or '>'.
Notes:
- Padding is only automatically added between successive structure members.
No padding is added at the beginning or the end of the encoded struct.
- No padding is added when using non-native size and alignment, e.g.
with ‘<’, ‘>’, ‘=’, and ‘!’.
- To align the end of a structure to the alignment requirement of a
particular type, end the format with the code for that type with a repeat
count of zero. See Examples.
7.3.2.2. Format Characters
Format characters have the following meaning; the conversion between C and
Python values should be obvious given their types. The ‘Standard size’ column
refers to the size of the packed value in bytes when using standard size; that
is, when the format string starts with one of '<', '>', '!' or
'='. When using native size, the size of the packed value is
platform-dependent.
| Format |
C Type |
Python type |
Standard size |
Notes |
x |
pad byte |
no value |
|
|
c |
char |
string of length 1 |
1 |
|
b |
signed char |
integer |
1 |
(3) |
B |
unsigned char |
integer |
1 |
(3) |
? |
_Bool |
bool |
1 |
(1) |
h |
short |
integer |
2 |
(3) |
H |
unsigned short |
integer |
2 |
(3) |
i |
int |
integer |
4 |
(3) |
I |
unsigned int |
integer |
4 |
(3) |
l |
long |
integer |
4 |
(3) |
L |
unsigned long |
integer |
4 |
(3) |
q |
long long |
integer |
8 |
(2), (3) |
Q |
unsigned long
long |
integer |
8 |
(2), (3) |
f |
float |
float |
4 |
(4) |
d |
double |
float |
8 |
(4) |
s |
char[] |
string |
|
|
p |
char[] |
string |
|
|
P |
void * |
integer |
|
(5), (3) |
Notes:
The '?' conversion code corresponds to the _Bool type defined by
C99. If this type is not available, it is simulated using a char. In
standard mode, it is always represented by one byte.
The 'q' and 'Q' conversion codes are available in native mode only if
the platform C compiler supports C long long, or, on Windows,
__int64. They are always available in standard modes.
When attempting to pack a non-integer using any of the integer conversion
codes, if the non-integer has a __index__() method then that method is
called to convert the argument to an integer before packing. If no
__index__() method exists, or the call to __index__() raises
TypeError, then the __int__() method is tried. However, the use
of __int__() is deprecated, and will raise DeprecationWarning.
Changed in version 2.7: Use of the __index__() method for non-integers is new in 2.7.
Changed in version 2.7: Prior to version 2.7, not all integer conversion codes would use the
__int__() method to convert, and DeprecationWarning was
raised only for float arguments.
For the 'f' and 'd' conversion codes, the packed representation uses
the IEEE 754 binary32 (for 'f') or binary64 (for 'd') format,
regardless of the floating-point format used by the platform.
The 'P' format character is only available for the native byte ordering
(selected as the default or with the '@' byte order character). The byte
order character '=' chooses to use little- or big-endian ordering based
on the host system. The struct module does not interpret this as native
ordering, so the 'P' format is not available.
A format character may be preceded by an integral repeat count. For example,
the format string '4h' means exactly the same as 'hhhh'.
Whitespace characters between formats are ignored; a count and its format must
not contain whitespace though.
For the 's' format character, the count is interpreted as the size of the
string, not a repeat count like for the other format characters; for example,
'10s' means a single 10-byte string, while '10c' means 10 characters.
If a count is not given, it defaults to 1. For packing, the string is
truncated or padded with null bytes as appropriate to make it fit. For
unpacking, the resulting string always has exactly the specified number of
bytes. As a special case, '0s' means a single, empty string (while
'0c' means 0 characters).
The 'p' format character encodes a “Pascal string”, meaning a short
variable-length string stored in a fixed number of bytes, given by the count.
The first byte stored is the length of the string, or 255, whichever is smaller.
The bytes of the string follow. If the string passed in to pack() is too
long (longer than the count minus 1), only the leading count-1 bytes of the
string are stored. If the string is shorter than count-1, it is padded with
null bytes so that exactly count bytes in all are used. Note that for
unpack(), the 'p' format character consumes count bytes, but that the
string returned can never contain more than 255 characters.
For the 'P' format character, the return value is a Python integer or long
integer, depending on the size needed to hold a pointer when it has been cast to
an integer type. A NULL pointer will always be returned as the Python integer
0. When packing pointer-sized values, Python integer or long integer objects
may be used. For example, the Alpha and Merced processors use 64-bit pointer
values, meaning a Python long integer will be used to hold the pointer; other
platforms use 32-bit pointers and will use a Python integer.
For the '?' format character, the return value is either True or
False. When packing, the truth value of the argument object is used.
Either 0 or 1 in the native or standard bool representation will be packed, and
any non-zero value will be True when unpacking.
7.3.2.3. Examples
Note
All examples assume a native byte order, size, and alignment with a
big-endian machine.
A basic example of packing/unpacking three integers:
>>> from struct import *
>>> pack('hhl', 1, 2, 3)
'\x00\x01\x00\x02\x00\x00\x00\x03'
>>> unpack('hhl', '\x00\x01\x00\x02\x00\x00\x00\x03')
(1, 2, 3)
>>> calcsize('hhl')
8
Unpacked fields can be named by assigning them to variables or by wrapping
the result in a named tuple:
>>> record = 'raymond \x32\x12\x08\x01\x08'
>>> name, serialnum, school, gradelevel = unpack('<10sHHb', record)
>>> from collections import namedtuple
>>> Student = namedtuple('Student', 'name serialnum school gradelevel')
>>> Student._make(unpack('<10sHHb', record))
Student(name='raymond ', serialnum=4658, school=264, gradelevel=8)
The ordering of format characters may have an impact on size since the padding
needed to satisfy alignment requirements is different:
>>> pack('ci', '*', 0x12131415)
'*\x00\x00\x00\x12\x13\x14\x15'
>>> pack('ic', 0x12131415, '*')
'\x12\x13\x14\x15*'
>>> calcsize('ci')
8
>>> calcsize('ic')
5
The following format 'llh0l' specifies two pad bytes at the end, assuming
longs are aligned on 4-byte boundaries:
>>> pack('llh0l', 1, 2, 3)
'\x00\x00\x00\x01\x00\x00\x00\x02\x00\x03\x00\x00'
This only works when native size and alignment are in effect; standard size and
alignment does not enforce any alignment.
See also
- Module
array
- Packed binary storage of homogeneous data.
- Module
xdrlib
- Packing and unpacking of XDR data.