Unicode Objects
Unicode Type
These are the basic Unicode object types used for the Unicode implementation in
Python:
-
Py_UNICODE
This type represents the storage type which is used by Python internally as
basis for holding Unicode ordinals. Python’s default builds use a 16-bit type
for Py_UNICODE and store Unicode values internally as UCS2. It is also
possible to build a UCS4 version of Python (most recent Linux distributions come
with UCS4 builds of Python). These builds then use a 32-bit type for
Py_UNICODE and store Unicode data internally as UCS4. On platforms
where wchar_t is available and compatible with the chosen Python
Unicode build variant, Py_UNICODE is a typedef alias for
wchar_t to enhance native platform compatibility. On all other
platforms, Py_UNICODE is a typedef alias for either unsigned
short (UCS2) or unsigned long (UCS4).
Note that UCS2 and UCS4 Python builds are not binary compatible. Please keep
this in mind when writing extensions or interfaces.
-
PyUnicodeObject
This subtype of PyObject represents a Python Unicode object.
-
PyTypeObject
PyUnicode_Type
This instance of PyTypeObject represents the Python Unicode type. It
is exposed to Python code as unicode and types.UnicodeType.
The following APIs are really C macros and can be used to do fast checks and to
access internal read-only data of Unicode objects:
-
int
PyUnicode_Check(PyObject *o)
Return true if the object o is a Unicode object or an instance of a Unicode
subtype.
Changed in version 2.2: Allowed subtypes to be accepted.
-
int
PyUnicode_CheckExact(PyObject *o)
Return true if the object o is a Unicode object, but not an instance of a
subtype.
-
Py_ssize_t
PyUnicode_GET_SIZE(PyObject *o)
Return the size of the object. o has to be a PyUnicodeObject (not
checked).
Changed in version 2.5: This function returned an int type. This might require changes
in your code for properly supporting 64-bit systems.
-
Py_ssize_t
PyUnicode_GET_DATA_SIZE(PyObject *o)
Return the size of the object’s internal buffer in bytes. o has to be a
PyUnicodeObject (not checked).
Changed in version 2.5: This function returned an int type. This might require changes
in your code for properly supporting 64-bit systems.
-
Py_UNICODE*
PyUnicode_AS_UNICODE(PyObject *o)
Return a pointer to the internal Py_UNICODE buffer of the object. o
has to be a PyUnicodeObject (not checked).
-
const char*
PyUnicode_AS_DATA(PyObject *o)
Return a pointer to the internal buffer of the object. o has to be a
PyUnicodeObject (not checked).
-
int
PyUnicode_ClearFreeList()
Clear the free list. Return the total number of freed items.
Unicode Character Properties
Unicode provides many different character properties. The most often needed ones
are available through these macros which are mapped to C functions depending on
the Python configuration.
-
int
Py_UNICODE_ISSPACE(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is a whitespace character.
-
int
Py_UNICODE_ISLOWER(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is a lowercase character.
-
int
Py_UNICODE_ISUPPER(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is an uppercase character.
-
int
Py_UNICODE_ISTITLE(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is a titlecase character.
-
int
Py_UNICODE_ISLINEBREAK(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is a linebreak character.
-
int
Py_UNICODE_ISDECIMAL(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is a decimal character.
-
int
Py_UNICODE_ISDIGIT(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is a digit character.
-
int
Py_UNICODE_ISNUMERIC(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is a numeric character.
-
int
Py_UNICODE_ISALPHA(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is an alphabetic character.
-
int
Py_UNICODE_ISALNUM(Py_UNICODE ch)
Return 1 or 0 depending on whether ch is an alphanumeric character.
These APIs can be used for fast direct character conversions:
-
Py_UNICODE
Py_UNICODE_TOLOWER(Py_UNICODE ch)
Return the character ch converted to lower case.
-
Py_UNICODE
Py_UNICODE_TOUPPER(Py_UNICODE ch)
Return the character ch converted to upper case.
-
Py_UNICODE
Py_UNICODE_TOTITLE(Py_UNICODE ch)
Return the character ch converted to title case.
-
int
Py_UNICODE_TODECIMAL(Py_UNICODE ch)
Return the character ch converted to a decimal positive integer. Return
-1 if this is not possible. This macro does not raise exceptions.
-
int
Py_UNICODE_TODIGIT(Py_UNICODE ch)
Return the character ch converted to a single digit integer. Return -1 if
this is not possible. This macro does not raise exceptions.
-
double
Py_UNICODE_TONUMERIC(Py_UNICODE ch)
Return the character ch converted to a double. Return -1.0 if this is not
possible. This macro does not raise exceptions.
Plain Py_UNICODE
To create Unicode objects and access their basic sequence properties, use these
APIs:
-
PyObject*
PyUnicode_FromUnicode(const Py_UNICODE *u, Py_ssize_t size)
- Return value: New reference.
Create a Unicode object from the Py_UNICODE buffer u of the given size. u
may be NULL which causes the contents to be undefined. It is the user’s
responsibility to fill in the needed data. The buffer is copied into the new
object. If the buffer is not NULL, the return value might be a shared object.
Therefore, modification of the resulting Unicode object is only allowed when u
is NULL.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_FromStringAndSize(const char *u, Py_ssize_t size)
- Return value: New reference.
Create a Unicode object from the char buffer u. The bytes will be interpreted
as being UTF-8 encoded. u may also be NULL which
causes the contents to be undefined. It is the user’s responsibility to fill in
the needed data. The buffer is copied into the new object. If the buffer is not
NULL, the return value might be a shared object. Therefore, modification of
the resulting Unicode object is only allowed when u is NULL.
-
PyObject *
PyUnicode_FromString(const char *u)
- Return value: New reference.
Create a Unicode object from a UTF-8 encoded null-terminated char buffer
u.
-
PyObject*
PyUnicode_FromFormat(const char *format, ...)
- Return value: New reference.
Take a C printf()-style format string and a variable number of
arguments, calculate the size of the resulting Python unicode string and return
a string with the values formatted into it. The variable arguments must be C
types and must correspond exactly to the format characters in the format
string. The following format characters are allowed:
| Format Characters |
Type |
Comment |
%% |
n/a |
The literal % character. |
%c |
int |
A single character,
represented as a C int. |
%d |
int |
Exactly equivalent to
printf("%d"). |
%u |
unsigned int |
Exactly equivalent to
printf("%u"). |
%ld |
long |
Exactly equivalent to
printf("%ld"). |
%lu |
unsigned long |
Exactly equivalent to
printf("%lu"). |
%zd |
Py_ssize_t |
Exactly equivalent to
printf("%zd"). |
%zu |
size_t |
Exactly equivalent to
printf("%zu"). |
%i |
int |
Exactly equivalent to
printf("%i"). |
%x |
int |
Exactly equivalent to
printf("%x"). |
%s |
char* |
A null-terminated C character
array. |
%p |
void* |
The hex representation of a C
pointer. Mostly equivalent to
printf("%p") except that
it is guaranteed to start with
the literal 0x regardless
of what the platform’s
printf yields. |
%U |
PyObject* |
A unicode object. |
%V |
PyObject*, char * |
A unicode object (which may be
NULL) and a null-terminated
C character array as a second
parameter (which will be used,
if the first parameter is
NULL). |
%S |
PyObject* |
The result of calling
PyObject_Unicode(). |
%R |
PyObject* |
The result of calling
PyObject_Repr(). |
An unrecognized format character causes all the rest of the format string to be
copied as-is to the result string, and any extra arguments discarded.
-
PyObject*
PyUnicode_FromFormatV(const char *format, va_list vargs)
- Return value: New reference.
Identical to PyUnicode_FromFormat() except that it takes exactly two
arguments.
-
Py_UNICODE*
PyUnicode_AsUnicode(PyObject *unicode)
Return a read-only pointer to the Unicode object’s internal
Py_UNICODE buffer, NULL if unicode is not a Unicode object.
Note that the resulting Py_UNICODE* string may contain embedded
null characters, which would cause the string to be truncated when used in
most C functions.
-
Py_ssize_t
PyUnicode_GetSize(PyObject *unicode)
Return the length of the Unicode object.
Changed in version 2.5: This function returned an int type. This might require changes
in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_FromEncodedObject(PyObject *obj, const char *encoding, const char *errors)
- Return value: New reference.
Coerce an encoded object obj to a Unicode object and return a reference with
incremented refcount.
String and other char buffer compatible objects are decoded according to the
given encoding and using the error handling defined by errors. Both can be
NULL to have the interface use the default values (see the next section for
details).
All other objects, including Unicode objects, cause a TypeError to be
set.
The API returns NULL if there was an error. The caller is responsible for
decref’ing the returned objects.
-
PyObject*
PyUnicode_FromObject(PyObject *obj)
- Return value: New reference.
Shortcut for PyUnicode_FromEncodedObject(obj, NULL, "strict") which is used
throughout the interpreter whenever coercion to Unicode is needed.
If the platform supports wchar_t and provides a header file wchar.h,
Python can interface directly to this type using the following functions.
Support is optimized if Python’s own Py_UNICODE type is identical to
the system’s wchar_t.
wchar_t Support
wchar_t support for platforms which support it:
-
PyObject*
PyUnicode_FromWideChar(const wchar_t *w, Py_ssize_t size)
- Return value: New reference.
Create a Unicode object from the wchar_t buffer w of the given size.
Return NULL on failure.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
Py_ssize_t
PyUnicode_AsWideChar(PyUnicodeObject *unicode, wchar_t *w, Py_ssize_t size)
Copy the Unicode object contents into the wchar_t buffer w. At most
size wchar_t characters are copied (excluding a possibly trailing
0-termination character). Return the number of wchar_t characters
copied or -1 in case of an error. Note that the resulting wchar_t
string may or may not be 0-terminated. It is the responsibility of the caller
to make sure that the wchar_t string is 0-terminated in case this is
required by the application. Also, note that the wchar_t* string
might contain null characters, which would cause the string to be truncated
when used with most C functions.
Changed in version 2.5: This function returned an int type and used an int
type for size. This might require changes in your code for properly
supporting 64-bit systems.
Built-in Codecs
Python provides a set of built-in codecs which are written in C for speed. All of
these codecs are directly usable via the following functions.
Many of the following APIs take two arguments encoding and errors, and they
have the same semantics as the ones of the built-in unicode() Unicode
object constructor.
Setting encoding to NULL causes the default encoding to be used which is
ASCII. The file system calls should use Py_FileSystemDefaultEncoding
as the encoding for file names. This variable should be treated as read-only: on
some systems, it will be a pointer to a static string, on others, it will change
at run-time (such as when the application invokes setlocale).
Error handling is set by errors which may also be set to NULL meaning to use
the default handling defined for the codec. Default error handling for all
built-in codecs is “strict” (ValueError is raised).
The codecs all use a similar interface. Only deviation from the following
generic ones are documented for simplicity.
Generic Codecs
These are the generic codec APIs:
-
PyObject*
PyUnicode_Decode(const char *s, Py_ssize_t size, const char *encoding, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the encoded string s.
encoding and errors have the same meaning as the parameters of the same name
in the unicode() built-in function. The codec to be used is looked up
using the Python codec registry. Return NULL if an exception was raised by
the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_Encode(const Py_UNICODE *s, Py_ssize_t size, const char *encoding, const char *errors)
- Return value: New reference.
Encode the Py_UNICODE buffer s of the given size and return a Python
string object. encoding and errors have the same meaning as the parameters
of the same name in the Unicode encode() method. The codec
to be used is looked up using the Python codec registry. Return NULL if
an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsEncodedString(PyObject *unicode, const char *encoding, const char *errors)
- Return value: New reference.
Encode a Unicode object and return the result as Python string object.
encoding and errors have the same meaning as the parameters of the same name
in the Unicode encode() method. The codec to be used is looked up using
the Python codec registry. Return NULL if an exception was raised by the
codec.
UTF-8 Codecs
These are the UTF-8 codec APIs:
-
PyObject*
PyUnicode_DecodeUTF8(const char *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the UTF-8 encoded string
s. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_DecodeUTF8Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
- Return value: New reference.
If consumed is NULL, behave like PyUnicode_DecodeUTF8(). If
consumed is not NULL, trailing incomplete UTF-8 byte sequences will not be
treated as an error. Those bytes will not be decoded and the number of bytes
that have been decoded will be stored in consumed.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_EncodeUTF8(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Encode the Py_UNICODE buffer s of the given size using UTF-8 and return a
Python string object. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsUTF8String(PyObject *unicode)
- Return value: New reference.
Encode a Unicode object using UTF-8 and return the result as Python string
object. Error handling is “strict”. Return NULL if an exception was raised
by the codec.
UTF-32 Codecs
These are the UTF-32 codec APIs:
-
PyObject*
PyUnicode_DecodeUTF32(const char *s, Py_ssize_t size, const char *errors, int *byteorder)
Decode size bytes from a UTF-32 encoded buffer string and return the
corresponding Unicode object. errors (if non-NULL) defines the error
handling. It defaults to “strict”.
If byteorder is non-NULL, the decoder starts decoding using the given byte
order:
*byteorder == -1: little endian
*byteorder == 0: native order
*byteorder == 1: big endian
If *byteorder is zero, and the first four bytes of the input data are a
byte order mark (BOM), the decoder switches to this byte order and the BOM is
not copied into the resulting Unicode string. If *byteorder is -1 or
1, any byte order mark is copied to the output.
After completion, *byteorder is set to the current byte order at the end
of input data.
In a narrow build code points outside the BMP will be decoded as surrogate pairs.
If byteorder is NULL, the codec starts in native order mode.
Return NULL if an exception was raised by the codec.
-
PyObject*
PyUnicode_DecodeUTF32Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
If consumed is NULL, behave like PyUnicode_DecodeUTF32(). If
consumed is not NULL, PyUnicode_DecodeUTF32Stateful() will not treat
trailing incomplete UTF-32 byte sequences (such as a number of bytes not divisible
by four) as an error. Those bytes will not be decoded and the number of bytes
that have been decoded will be stored in consumed.
-
PyObject*
PyUnicode_EncodeUTF32(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder)
Return a Python bytes object holding the UTF-32 encoded value of the Unicode
data in s. Output is written according to the following byte order:
byteorder == -1: little endian
byteorder == 0: native byte order (writes a BOM mark)
byteorder == 1: big endian
If byteorder is 0, the output string will always start with the Unicode BOM
mark (U+FEFF). In the other two modes, no BOM mark is prepended.
If Py_UNICODE_WIDE is not defined, surrogate pairs will be output
as a single code point.
Return NULL if an exception was raised by the codec.
-
PyObject*
PyUnicode_AsUTF32String(PyObject *unicode)
Return a Python string using the UTF-32 encoding in native byte order. The
string always starts with a BOM mark. Error handling is “strict”. Return
NULL if an exception was raised by the codec.
UTF-16 Codecs
These are the UTF-16 codec APIs:
-
PyObject*
PyUnicode_DecodeUTF16(const char *s, Py_ssize_t size, const char *errors, int *byteorder)
- Return value: New reference.
Decode size bytes from a UTF-16 encoded buffer string and return the
corresponding Unicode object. errors (if non-NULL) defines the error
handling. It defaults to “strict”.
If byteorder is non-NULL, the decoder starts decoding using the given byte
order:
*byteorder == -1: little endian
*byteorder == 0: native order
*byteorder == 1: big endian
If *byteorder is zero, and the first two bytes of the input data are a
byte order mark (BOM), the decoder switches to this byte order and the BOM is
not copied into the resulting Unicode string. If *byteorder is -1 or
1, any byte order mark is copied to the output (where it will result in
either a \ufeff or a \ufffe character).
After completion, *byteorder is set to the current byte order at the end
of input data.
If byteorder is NULL, the codec starts in native order mode.
Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_DecodeUTF16Stateful(const char *s, Py_ssize_t size, const char *errors, int *byteorder, Py_ssize_t *consumed)
- Return value: New reference.
If consumed is NULL, behave like PyUnicode_DecodeUTF16(). If
consumed is not NULL, PyUnicode_DecodeUTF16Stateful() will not treat
trailing incomplete UTF-16 byte sequences (such as an odd number of bytes or a
split surrogate pair) as an error. Those bytes will not be decoded and the
number of bytes that have been decoded will be stored in consumed.
Changed in version 2.5: This function used an int type for size and an int *
type for consumed. This might require changes in your code for
properly supporting 64-bit systems.
-
PyObject*
PyUnicode_EncodeUTF16(const Py_UNICODE *s, Py_ssize_t size, const char *errors, int byteorder)
- Return value: New reference.
Return a Python string object holding the UTF-16 encoded value of the Unicode
data in s. Output is written according to the following byte order:
byteorder == -1: little endian
byteorder == 0: native byte order (writes a BOM mark)
byteorder == 1: big endian
If byteorder is 0, the output string will always start with the Unicode BOM
mark (U+FEFF). In the other two modes, no BOM mark is prepended.
If Py_UNICODE_WIDE is defined, a single Py_UNICODE value may get
represented as a surrogate pair. If it is not defined, each Py_UNICODE
values is interpreted as a UCS-2 character.
Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsUTF16String(PyObject *unicode)
- Return value: New reference.
Return a Python string using the UTF-16 encoding in native byte order. The
string always starts with a BOM mark. Error handling is “strict”. Return
NULL if an exception was raised by the codec.
UTF-7 Codecs
These are the UTF-7 codec APIs:
-
PyObject*
PyUnicode_DecodeUTF7(const char *s, Py_ssize_t size, const char *errors)
Create a Unicode object by decoding size bytes of the UTF-7 encoded string
s. Return NULL if an exception was raised by the codec.
-
PyObject*
PyUnicode_DecodeUTF7Stateful(const char *s, Py_ssize_t size, const char *errors, Py_ssize_t *consumed)
If consumed is NULL, behave like PyUnicode_DecodeUTF7(). If
consumed is not NULL, trailing incomplete UTF-7 base-64 sections will not
be treated as an error. Those bytes will not be decoded and the number of
bytes that have been decoded will be stored in consumed.
-
PyObject*
PyUnicode_EncodeUTF7(const Py_UNICODE *s, Py_ssize_t size, int base64SetO, int base64WhiteSpace, const char *errors)
Encode the Py_UNICODE buffer of the given size using UTF-7 and
return a Python bytes object. Return NULL if an exception was raised by
the codec.
If base64SetO is nonzero, “Set O” (punctuation that has no otherwise
special meaning) will be encoded in base-64. If base64WhiteSpace is
nonzero, whitespace will be encoded in base-64. Both are set to zero for the
Python “utf-7” codec.
Unicode-Escape Codecs
These are the “Unicode Escape” codec APIs:
-
PyObject*
PyUnicode_DecodeUnicodeEscape(const char *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the Unicode-Escape encoded
string s. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_EncodeUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size)
- Return value: New reference.
Encode the Py_UNICODE buffer of the given size using Unicode-Escape and
return a Python string object. Return NULL if an exception was raised by the
codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsUnicodeEscapeString(PyObject *unicode)
- Return value: New reference.
Encode a Unicode object using Unicode-Escape and return the result as Python
string object. Error handling is “strict”. Return NULL if an exception was
raised by the codec.
Raw-Unicode-Escape Codecs
These are the “Raw Unicode Escape” codec APIs:
-
PyObject*
PyUnicode_DecodeRawUnicodeEscape(const char *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the Raw-Unicode-Escape
encoded string s. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_EncodeRawUnicodeEscape(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Encode the Py_UNICODE buffer of the given size using Raw-Unicode-Escape
and return a Python string object. Return NULL if an exception was raised by
the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsRawUnicodeEscapeString(PyObject *unicode)
- Return value: New reference.
Encode a Unicode object using Raw-Unicode-Escape and return the result as
Python string object. Error handling is “strict”. Return NULL if an exception
was raised by the codec.
Latin-1 Codecs
These are the Latin-1 codec APIs: Latin-1 corresponds to the first 256 Unicode
ordinals and only these are accepted by the codecs during encoding.
-
PyObject*
PyUnicode_DecodeLatin1(const char *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the Latin-1 encoded string
s. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_EncodeLatin1(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Encode the Py_UNICODE buffer of the given size using Latin-1 and return
a Python string object. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsLatin1String(PyObject *unicode)
- Return value: New reference.
Encode a Unicode object using Latin-1 and return the result as Python string
object. Error handling is “strict”. Return NULL if an exception was raised
by the codec.
ASCII Codecs
These are the ASCII codec APIs. Only 7-bit ASCII data is accepted. All other
codes generate errors.
-
PyObject*
PyUnicode_DecodeASCII(const char *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the ASCII encoded string
s. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_EncodeASCII(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Encode the Py_UNICODE buffer of the given size using ASCII and return a
Python string object. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsASCIIString(PyObject *unicode)
- Return value: New reference.
Encode a Unicode object using ASCII and return the result as Python string
object. Error handling is “strict”. Return NULL if an exception was raised
by the codec.
Character Map Codecs
This codec is special in that it can be used to implement many different codecs
(and this is in fact what was done to obtain most of the standard codecs
included in the encodings package). The codec uses mapping to encode and
decode characters.
Decoding mappings must map single string characters to single Unicode
characters, integers (which are then interpreted as Unicode ordinals) or None
(meaning “undefined mapping” and causing an error).
Encoding mappings must map single Unicode characters to single string
characters, integers (which are then interpreted as Latin-1 ordinals) or None
(meaning “undefined mapping” and causing an error).
The mapping objects provided must only support the __getitem__ mapping
interface.
If a character lookup fails with a LookupError, the character is copied as-is
meaning that its ordinal value will be interpreted as Unicode or Latin-1 ordinal
resp. Because of this, mappings only need to contain those mappings which map
characters to different code points.
These are the mapping codec APIs:
-
PyObject*
PyUnicode_DecodeCharmap(const char *s, Py_ssize_t size, PyObject *mapping, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the encoded string s using
the given mapping object. Return NULL if an exception was raised by the
codec. If mapping is NULL latin-1 decoding will be done. Else it can be a
dictionary mapping byte or a unicode string, which is treated as a lookup table.
Byte values greater that the length of the string and U+FFFE “characters” are
treated as “undefined mapping”.
Changed in version 2.4: Allowed unicode string as mapping argument.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_EncodeCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *mapping, const char *errors)
- Return value: New reference.
Encode the Py_UNICODE buffer of the given size using the given
mapping object and return a Python string object. Return NULL if an
exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsCharmapString(PyObject *unicode, PyObject *mapping)
- Return value: New reference.
Encode a Unicode object using the given mapping object and return the result
as Python string object. Error handling is “strict”. Return NULL if an
exception was raised by the codec.
The following codec API is special in that maps Unicode to Unicode.
-
PyObject*
PyUnicode_TranslateCharmap(const Py_UNICODE *s, Py_ssize_t size, PyObject *table, const char *errors)
- Return value: New reference.
Translate a Py_UNICODE buffer of the given size by applying a
character mapping table to it and return the resulting Unicode object. Return
NULL when an exception was raised by the codec.
The mapping table must map Unicode ordinal integers to Unicode ordinal
integers or None (causing deletion of the character).
Mapping tables need only provide the __getitem__() interface; dictionaries
and sequences work well. Unmapped character ordinals (ones which cause a
LookupError) are left untouched and are copied as-is.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
MBCS codecs for Windows
These are the MBCS codec APIs. They are currently only available on Windows and
use the Win32 MBCS converters to implement the conversions. Note that MBCS (or
DBCS) is a class of encodings, not just one. The target encoding is defined by
the user settings on the machine running the codec.
-
PyObject*
PyUnicode_DecodeMBCS(const char *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Create a Unicode object by decoding size bytes of the MBCS encoded string s.
Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_DecodeMBCSStateful(const char *s, int size, const char *errors, int *consumed)
If consumed is NULL, behave like PyUnicode_DecodeMBCS(). If
consumed is not NULL, PyUnicode_DecodeMBCSStateful() will not decode
trailing lead byte and the number of bytes that have been decoded will be stored
in consumed.
-
PyObject*
PyUnicode_EncodeMBCS(const Py_UNICODE *s, Py_ssize_t size, const char *errors)
- Return value: New reference.
Encode the Py_UNICODE buffer of the given size using MBCS and return a
Python string object. Return NULL if an exception was raised by the codec.
Changed in version 2.5: This function used an int type for size. This might require
changes in your code for properly supporting 64-bit systems.
-
PyObject*
PyUnicode_AsMBCSString(PyObject *unicode)
- Return value: New reference.
Encode a Unicode object using MBCS and return the result as Python string
object. Error handling is “strict”. Return NULL if an exception was raised
by the codec.
Methods & Slots